m-Cresol

m-Cresol( CAS 108-39-4) is a colorless liquid with a sweet tarry odor. Sinks and mixes slowly with water.m-Cresol is sensitive to air, light and heat. m-Cresol is also hygroscopic. m-Cresol can react vigorously with strong oxidizers and strong bases. m-Cresol reacts violently with nitric acid, oleum, chlorosulfonic acid, metals and strong acids. If the water content is below approximately 0.3% and the temperature above 248째 F, the corrosion of aluminum and its alloys may occur violently. m-Cresol will attack some forms of plastics, coatings and rubber.It is mainly used as analytical reagent and organic synthesis intermediates.

Decanedihydrazide

 Decanedihydrazide (CAS 125-83-7 ) is a white crystalline power.It can be used as the latent curing agent for epoxy resin (EP) .The coating film of powder coating made by EP / SPH has excellent flexibility, water resistance, weatherability, anticorrosion, Insulation and decorative. Because of its excellent comprehensive performance, it is widely used in decorating powder, insulating powder, smoldering powder, electric powder and heavy anti-corrosion powder. At present, especially at home and abroad, Oil pipelines, aerospace, aviation fuel, and other areas of indispensable latent curing agent.

Trimethylol Propane

Trimethylol Propane is white flake crystallization. Soluble in water, low carbon alcohol,glycerin,N,N- dimethyl formamide, partly soluble in acetone, ethyl acetate, slightly soluble in carbon tetrachloride, ethyl ether and chloroform, but insoluble in aliphatic hydrocarbons, aromatic hydrocarbons and chlorinated hydrocarbons.

Butanedihydrazide

Butanedihydrazide ( CAS 4146-43-4) is a kind of white crystalline power. Can widely used as power  coatings and adhesives.

Ammonium bisulfite

Ammonium bisulfite (CAS 10192-30-0),a light yellow liquid,with the best purity. It can be used in dye intermediate synthesis, surfactant, herbicide, pharmaceutical industry reducing agent and the protection of developing process in photographic industry.

N,N'-Bis(2-hydroxyethyl)ethylenediamine

N,N'-Bis(2-hydroxyethyl)ethylenediamine ( CAS 4439-20-7), white to light yellow crystalline powder, with boiling point 305.1°C at 760 mmHg,flash point 146.2°C,and Vapour Pressur 7.93E-05mmHg at 25°C. It can be used as a dibasic alcohol or diamine, mainly used for plastics curing agent, epoxy resin curing agent, lubricant additives, desulfurizer, acidic gas absorption agent, wetting agent, surface active agent, pharmaceutical intermediates, raw materials and polymer monomer liquid crystal intermediates, etc

Cysteamine hydrochloride

Cysteamine hydrochloride is white crystalline powder,The specific gravity is 1.3-1.4,melting point is 62-70°C, It is not inflammable and explosive chemicals,it is one kind of unstable matter in the light.

Terbinafine hydrochloride

Terbinafine Hydrochloride (CAS 78628-80-5) is White or off white powder,Very slightly or slightly soluble in water.Freely soluble in anhydrous ethanol and methanol,slightly soluble in acetone.