TNJ Product Finder
TNJ can provide variety of chemicals which can be applied into industrial, food, pharmaceutical and cosmetic fields. Here you can search what you are looking for by Chemical name, CAS number and other names. You can also find the chemicals by application fields listed on the left of this page.
If you can\'t find it please Contact Us>>
Search Results
O-Cresol (CAS 95-48-7),colorless or yellow to brown-yellow or pinkish colored liquid with a phenol-like odor. Toxic by ingestion and/or skin absorption. May have a flash point between 100 and 199°F. Causes burns to skin, eyes and mucous membranes. Insoluble in water. O-Cresol is incompatible with oxidizing agents and bases. Mixing o-Cresol with chlorosulfonic acid, nitric acid and oleum in a closed contained caused the temperature and pressure to increase.It mainly used in organic synthesis, and as a disinfectant and preservative.
m-Cresol( CAS 108-39-4) is a colorless liquid with a sweet tarry odor. Sinks and mixes slowly with water.m-Cresol is sensitive to air, light and heat. m-Cresol is also hygroscopic. m-Cresol can react vigorously with strong oxidizers and strong bases. m-Cresol reacts violently with nitric acid, oleum, chlorosulfonic acid, metals and strong acids. If the water content is below approximately 0.3% and the temperature above 248째 F, the corrosion of aluminum and its alloys may occur violently. m-Cresol will attack some forms of plastics, coatings and rubber.It is mainly used as analytical reagent and organic synthesis intermediates.
Decanedihydrazide (CAS 125-83-7 ) is a white crystalline power.It can be used as the latent curing agent for epoxy resin (EP) .The coating film of powder coating made by EP / SPH has excellent flexibility, water resistance, weatherability, anticorrosion, Insulation and decorative. Because of its excellent comprehensive performance, it is widely used in decorating powder, insulating powder, smoldering powder, electric powder and heavy anti-corrosion powder. At present, especially at home and abroad, Oil pipelines, aerospace, aviation fuel, and other areas of indispensable latent curing agent.
N,N'-Bis(2-hydroxyethyl)ethylenediamine
N,N'-Bis(2-hydroxyethyl)ethylenediamine ( CAS 4439-20-7), white to light yellow crystalline powder, with boiling point 305.1°C at 760 mmHg,flash point 146.2°C,and Vapour Pressur 7.93E-05mmHg at 25°C. It can be used as a dibasic alcohol or diamine, mainly used for plastics curing agent, epoxy resin curing agent, lubricant additives, desulfurizer, acidic gas absorption agent, wetting agent, surface active agent, pharmaceutical intermediates, raw materials and polymer monomer liquid crystal intermediates, etc